There’s a Better Way Than Wire Nuts ⚡ Do you need to add a circuit in the field? Want an easy way to solve that problem? Look no further: Bottom Line The SW JB-9 replaces: ❌ Wire nuts ❌ Messy splices ❌ Time-consuming installs With: ✔ Fast, consistent connections ✔ Clean layouts ✔ Easier maintenance…
Add Process Monitoring Without Rewiring Your Entire Facility ⚡🌡️
A lot of facilities are starting to ask the same question: “How do we add monitoring without ripping everything apart?” Temperature. Humidity. Door position. Valve status. The Real Problem You identify a power source and a place to mount the device but then comes the wiring. Now you need to: Tap into existing power Distribute…
The 5-Minute Decisions That Adds Hours to Your Panel Build ⚡
“Most delays in a panel build don’t happen during the build.” They happen before it even starts. I’ve seen it over and over, a quick decision made in 5 minutes ends up costing hours later on the shop floor. Here’s where it usually goes wrong: 🔧 Wrong Terminal Block Choice Using outdated or non-functional ‘efficient’…
How Cable Grips Are Replacing Conduit and Cutting Real Costs
For decades, conduit has been the default answer for cable protection and strain relief. But in many real-world applications, it’s also one of the most expensive and labor-intensive parts of an install. More contractors and OEMs are starting to ask a simple question: Do we really need conduit here? In many cases, the answer is…
Precision and Productivity: Meet the CS-100 Wire Stripper
Reliable electrical connections start with proper wire preparation. The CS-100 wire stripper from GLW is designed to deliver clean, consistent insulation stripping while protecting conductor integrity. Strip 28-8 AWG conductors with ease – you can set the stripping length as well as the pull back length – protecting wire stands until it’s time to terminate! …
Precision and Productivity with the CS-60 Wire Stripper
In electrical panel building, speed and accuracy are everything. Every wire cut, every strip, and every termination has to be right the first time. That’s where the CS-60 Wire Stripper, by GLW, comes in. Designed for professional use, the CS-60 delivers precision stripping with the efficiency that today’s shops demand. Key Features The CS-60 is…
Simplify Connections and Save Time with Pre-Engineered Junction Boxes
In today’s fast-paced industrial environments, electrical engineers and system integrators are under constant pressure to deliver efficient, reliable solutions without compromising on safety or quality. That’s where American Electrical’s (AEI) junction boxes with pre-installed terminal blocks come in: a smarter, cleaner, and faster way to handle connections. See what we have available for you here:…
Terminal Blocks in a Junction Box – Engineered just for you in a NEMA 4X enclosure
American Electrical, Inc., (AEI) has 5, 10 ,15 and 20 position terminal blocks pre-engineered into a small junction box. Think of all the possibilities and time savings by buying this off the shelf – and, it’s only ONE part number. The boxes come with 2 – M20 cable grips and locknuts to make your design…
Barrier to Entry – Safety First
Barrier Strips are still being utilized in today’s Electrical Systems, despite all the advancements in connection technology. We’re trying to understand why this is so in the face of a myriad of safety advances in DIN Rail mounted Terminal Blocks. Barrier strips may assist the technician who loves their wide shank quarter inch screwdriver but…
