PYK Series Terminal Blocks


Practical Terminal Blocks

Cable is connected to the terminal just by pushing-in, without the need to use a screwdriver. PYK is suitable for applications with or without end-sleeves.  All you need to do is to push the cable into the cable hole to make the connection.  If needed, cable can be released easily by using a screwdriver.



Practical Terminal Blocks

Cable is connected to the terminal just by pushing-in, without the need to use a screwdriver. PYK is suitable for applications with or without end-sleeves. All you need to do is to push the cable into the cable hole to make the connection. If needed, cable can be released easily by using a screwdriver.


See our video on ground terminal blocks: https://www.youtube.com/watch?v=eR_5IX7p82w

Spring clamp earth terminals have the same outer dimensions as the standart PYK blocks for the same cross-sections. This enables earth terminal blocks to be mounted directly beside feed-through terminal blocks.

The main characteristics are:

  • Low transition resistance
  • Non-corrosing contacts
  • Green/yellow marking on the insulation.

The main difference between spring clamp earth terminals and the earth terminals with screw connections  is the immediate contact when the terminal blocks are attached to the mounting rails.