1.  Remove a small section of cable insulation to expose shield

2.  Clip metallic "contact" to shield

3.  Assemble EasyConnect around contact and fit

4.  Insert neoprene piece and locking dome

5.  Shield is now connected electrically to cable grip

6.   IP 68 sealing

• Wider Domed Nut Which Can Not Be Over-Tightened.- The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier.
• Generous Deep Flats- The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
• A small spacer exists between the domed nut and the locking collet, providing an additional seal when fully tightened.
• Neoprene Rubber Seal- This seal grips around the cable to form the IP68 barrier when properly tightened.
• Webs Are Staggered For Better Grip- Webs are designed in an alternating geometry which enhances gripping capability.
• Staggered Webs- The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
• Sprung Webs- The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
• Retention Springs For Domed Nut- The ‘Tight Seal’ design allows the domed nut to lock with the collet before any threads are engaged. This guards against misthreads as well as aids in the installation process.
• Sealing Lip- The collet design incorporates a sealing lip which provides for a positive seal against the enclosure.
• Anti-Twist Cable Locking Collet- The entire design of the ‘Tight Seal’ product line insures that cables will not twist or turn once locked down.

Tested in accordance with US standard NFPA 130.  The only cable grip in the world tested to this standard.

**Lock Nuts Sold Separately**

• Wider Domed Nut Which Can Not Be Over-Tightened.
  The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier.
• Generous Deep Flats
  The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
• Spacer
  A small spacer exists between the domed nut and the locking collet, providing an additional seal when fully tightened.
• Neoprene Rubber Seal
  This seal grips around the cable to form the IP68 barrier when properly tightened.
• Webs Are Staggered For Better Grip
  Webs are designed in an alternating geometry which enhances gripping capability.
• Staggered Webs
  The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
• Sprung Webs
  The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
• Retention Springs For Domed Nut
  The ‘Tight Seal’ design allows the domed nut to lock with the collet before any threads are engaged. This guards against misthreads as well as aids in the installation process.
• Sealing Lip
  The collet design incorporates a sealing lip which provides for a positive seal against the enclosure.
• Anti-Twist Cable Locking Collet
  The entire design of the ‘Tight Seal’ product line insures that cables will not twist or turn once locked down.

**Lock Nuts Sold Separately**

Domed Nut Which Can Not Be Over-Tightened.
The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier.

• Generous Deep Flats
  The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
• Spacer
  A small spacer exists between the domed nut and the locking collet, providing an additional seal when fully tightened.
• Neoprene Rubber Seal
  This seal grips around the cable to form the IP68 barrier when properly tightened.
• Webs Are Staggered For Better Grip
  Webs are designed in an alternating geometry which enhances gripping capability.
• Staggered Webs
  The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
• Sprung Webs
  The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
• Retention Springs For Domed Nut
  The ‘Tight Seal’ design allows the domed nut to lock with the collet before any threads are engaged. This guards against misthreads as well as aids in the installation process.
• Sealing Lip
  The collet design incorporates a sealing lip which provides for a positive seal against the enclosure.
• Anti-Twist Cable Locking Collet
  The entire design of the ‘Tight Seal’ product line insures that cables will not twist or turn once locked down.

• Material: CrNi- A2 Steel (DIN EN 1.4305/ AIAI 303)
• Temperature Range: -40°C to +100°C
• Seal: TPE
• O-ring: NBR
• IP rating: IP 68

• HIGH TEMPERATURE stainless steel cable grip
• Material: CrNi stainless steel A2 (DIN EN 1.4305/ AISI 303)
• Temperature Range: -40°C to +200°C
• Seal: FPM
• O- ring: FPM
• IP Rating: IP 68

• HIGH TEMPERATURE AND ACID RESISTANT
• Material: Stainless steel and acid resistant A4 CrNiMo (DIN EN 1.4435/ AISI 316L)
• Temperature Range: -40°C to +200°C
• Seal: FPM
• O-Ring: FPM
• IP Rating: IP 68